Traditional Gates

Traditional Gates Are 6’ 0” (1828mm) in height to the top of the horizontal bar and can be supplied in a variety of standard widths. (Width refers to the size of the opening, not the actual gate).
The overall height includes a 2” ground clearance where applicable.

Double Gates: The left hand gate opens first, both gates are fitted with a drop bolt.

Fittings: All fittings (i.e. hinge pins and striking plate) will be supplied with the gate prices are inclusive.
Screw in fittings are standard, but if required built in fittings can be supplied.

Specifications
Framework: 40mm x 10mm
flat Bottom and sides: 40mm x 40mm
box Infill bars: 16mm/12mm diameter
Scrollwork: 12mm x 5mm flatAll gates are finished in a black primer undercoat.
We recommend that a suitable top coat is added as soon as possible after the gates are fitted. A grey primer can be used if a white top coat is required, at a small charge. We also recommend using our Galvanising service, price on request.